Installation guide

1–Installation
12800-360 Installation
D000140-001 D 1-39
6. Orientation of the chassis on a pallet: The chassis has been packaged on
sliding surfaces to facilitate installation in a rack by sliding off of the pallet
and on the support shelf. Remove the rear foam block to expose sliding
surfaces. The rear of the chassis is oriented towards a cutout in the bottom
tray.
WARNING!!
To avoid injury, when fully loaded do not lift the 12800-260 manually. Use a
mechanized lift only. If a manual lift is necessary, first unload all field
replaceable units (FRUs) to minimize weight. Use a team of people
appropriate to the weight of the product and in conjunction with applicable
laws and guidelines.