Installation guide

1–Installation
12800-180 Installation
1-28 D000140-001 D
6. Fasten the mounting flanges using M6 screws to the clip nuts that are
pre-installed in the rack. There are six (6) screws per mounting flange.
Torque to 30in-lb.
WARNING!!
To avoid injury, when fully loaded do not lift manually. Use a mechanized lift
only. If a manual lift is necessary, first unload all field replaceable units
(FRUs) to minimize weight. Use a team of people appropriate to the weight
of the product and in conjunction with applicable laws and guidelines.