Installation guide

1–Installation
Installation Tasks Checklist
1-6 D000140-001 D
 The ambient temperature stays between 50° - 113°F (5° - 40° C).
 Cabinet doors do not interfere with front-to-back air flow.
The cabinet should have its own switchable power distribution. If the switch has
two power supplies, it is suggested that a cabinet with dual power distribution
units is used.
It is recommended that cabinet anti-tip devices are used. This is especially true if
installing or removing a switch in the upper half of the cabinet when the lower half
is empty.
Mark the Rack
Allow enough vertical space in the rack for each specific switch installation.
1. Determine the location in the rack of the bottom of the switch.
2. Mark the upper (if applicable) and lower mounting positions on the vertical
rails on the front of the rack.
3. Mark the upper (if applicable) and lower mounting positions on the vertical
rails on the back of the rack.