Installation guide

D–FRU Replacement
QLogic 12800 Series
D-4 D000140-001 D
QLogic 12800 Series
Fan Replacement
FRU part numbers:
 Intake Fan: 12800-FITK
 Exhaust Fan: 12800-FEXH
Removal Procedures
1. While holding the handle, push the release latch to the right
Figure D-2 .12800 Fan Removal
2. Pull the fan by the handle until disengaged from the chassis.
3. Determine whether this is an intake or exhaust fan by checking the FRU
label or noting the location of the open notch.