Installation guide

D–FRU Replacement
QLogic 12300
D000140-001 D D-3
Fan/Power Supply Replacement
FRU part number:12300-PS01
Removal Procedures
1. Push the finger tab to the right.
2. While holding the finger tab, pull the module handle to disengage the unit
from the switch.
Figure D-1 .12300 Fan/Power Module Removal
Replacement Procedures
1. Hold the unit by the handle and slide into the applicable slot until the finger
tab clicks into place.
NOTE:
These fan/power supplies are to be used exclusively with the QLogic 12300
QDR InfiniBand switch and are not intended to be sold separately.