Installation guide

A–QLogic 12000 Series Product Specifications
12800 Series
A-4 D000102-000 B
appropriate temperatures of major heat producing components. Monitoring
is performed via a two wire I2C interface to each Fan Tray.
Power Specifications
All products within the 12800 series use a common switching power supply. System
power attributes are shown in the table below. Power supplies are N+1 redundant
and hot pluggable.
NOTE:
An AC power cord is required for each power supply. Refer to the table
below.
Table A-3. System Power Attributes
Model # 12800-360 12800-180 12800-040
Maximum # of
Power
Supplies
12 6 4
Maximum
output per
supply
1200 Watts
Input voltage 90-264 VAC autoranging
Input
frequency and
phase
47-63 Hz
Maximum
current per
supply
100Amps
Inrush Current 30Amps Max
Power Factor
efficiency
99% @ 230V, full load
Power Inlet
connector
IEC320-C20
# of Power
Inlets
12 6 4
Power Cord
connector
IEC320-C19