Installation guide

1–Installation
Component LEDs
1-44 D000102-000 B
Leaf Module
Figure 1-38 Leaf Module LEDs
IB Port LEDs
Each module IB port has a Green IB link status LED that provide the following
indications:
• On - the logical link is up (port is in the Active state).
• Off - the physical link is down (port is in the Down state).
Module Status
The status LED indicates one of the following conditions:
• Steady Green - the module is operating normally.
• Blinking Green - LED test state.
• Off - module is in the removable state.
Module Attention
The Attention LED indicates one of the following conditions: