Installation guide

1–Installation
Connect Equipment to the Ports and Power On the System
D000102-000 B 1-31
Connect Equipment to the Ports and Power On
the System
NOTE:
Before connecting equipment, it is important to understand the locations of
the serial and Ethernet ports on the 12200, 12300 and 12800 series. For the
12200 and 12300, these are located on the switch IB port side. For the 12800
series, these are located on the Serial, Ethernet, Chassis EEPROM Board
(SEEB) modules. Each SEEB module communicates with a Management
Module (MM) on the opposite side of a 12800 chassis.
Figure 1-27 12200 and 12300 Serial and Ethernet Ports
Figure 1-28 12800 Series Serial and Ethernet Ports (SEEB Module)