Installation guide

1–Installation
12800-360 Standard Rack Installation
1-28 D000102-000 B
5. Install from the front of the rack as shown. Push chassis into the rack until
the rear of the chassis is against the Rear bracket.
Figure 1-24 Chassis Installation
6. Install the chassis in the rack by sliding off the pallet and onto the support
shelf. Install from the front of the rack as shown. Push chassis into the rack
until the rear of the chassis is against the Rear bracket.
7. Fasten the rear Base bracket to the base of the chassis with M6 screws.
There are 5 screws. Torque to 36in-lb.
8. Install the front Base bracket and fasten to the Support shelf with #10-32
Flat Head screws. There are 8 screws. Fasten the Front bracket to the
chassis base with M6 HEX screws. There are 5 screws. Torque to 36in-lb.