Installation guide

1–Installation
12800-360 Standard Rack Installation
D000102-000 B 1-25
Install the Chassis in the Rack
1. Orient and position the chassis for installation in the rack
WARNING!!
To avoid injury, install the 12800-360 using a mechanized lift only. When
fully-populated, the switch weighs 535lbs (244kg) (an empty chassis weighs
197lbs/90kg).
2. Orientation of the chassis on a pallet: The chassis has been packaged on
sliding surfaces to facilitate installation in the rack by sliding off the pallet and
onto the support shelf. Remove the rear foam block to expose sliding
surfaces.
Figure 1-21 Loading from the Pallet