Installation guide

ii D000102-000 B
QLogic 12000 Series InfiniBand Switches and Directors
Hardware Installation Guide
Information furnished in this manual is believed to be accurate and reliable. However, QLogic Corporation assumes no
responsibility for its use, nor for any infringements of patents or other rights of third parties which may result from its
use. QLogic Corporation reserves the right to change product specifications at any time without notice. Applications
described in this document for any of these products are for illustrative purposes only. QLogic Corporation makes no
representation nor warranty that such applications are suitable for the specified use without further testing or
modification. QLogic Corporation assumes no responsibility for any errors that may appear in this document.
Document Revision History
Revision B, August 15, 2010
Changes Sections Affected
Add procedures for installing a management mod-
ule in the 12200 switch.
“Management Module Installation” on page 1-7
Added procedures for the 12800-series manage-
ment module protective label.
“12800-Series Management Module Protective
Label Guidelines” on page 1-34
Added information for the 12800-series DC
ON/OFF switch.
“Connecting Power” on page 1-32
Added a note in Appendix A: 12800-series man-
agement modules should be replaced one at a
time.
“Management Module Replacement” on
page D-12