Installation guide

D–FRU Replacement
QLogic 12800 Series
D000102-000 B D-5
16. Reinstall any intra-rack cabling and additional hardware, customer racked
devices, components that were previously removed to facilitate component
swap and FRU replacement.
17. Check ALL power connections for proper seating.
18. Move replacement FRU rack to a location that enables full power
connectivity and verify all power connections and components are
operational.
19. Reinstall the side covers.
20. Reinstall the access cutout floor tile if previously removed.
21. Return the replacement rack to cluster suite.
22. Carefully reinstall all previously removed cabling that had been placed
beneath raised floor and or in overhead cabling troughs. Refer to IBM
System Cluster 1350/iDataPlex Cabling Guidelines for assistance if needed.
23. Power the rack on and verify all power is reapplied to all components.
24. Install the new RID Tag on new replacement rack and new replacement
chassis to ensure warranty data is transferred from original rack and switch
chassis.
25. Pack up the rack FRU that needs to be returned using the packing materials
that came with the new replacement FRU rack.
QLogic 12800 Series
Fan Replacement
FRU part numbers:
 Intake Fan: 12800-FITK-9X
 Exhaust Fan: 12800-FEXH-9X