Installation guide

Installation instructions for the out of kernel QLogic driver
63
Installing and Configuring the Linux Host with the QLogic Driver
Target : 3
Device ID : 0x84
Port ID : 6C-1B-13
Product Vendor : DGC
Product ID : RAID 3
Product Revision : 0207
Node Name : 50-06-01-60-90-60-12-70
Port Name : 50-06-01-62-10-60-12-70
Product Type : Disk
Number of LUN(s) : 14
Status : Online
-----------------------------------------------------------------------------
Path : 0
Target : 4
Device ID : 0x00
Port ID : 74-4A-13
Product Vendor : DGC
Product ID : LUNZ
Product Revision : 0206
Node Name : 50-06-01-60-90-60-12-5C
Port Name : 50-06-01-62-10-60-12-5C
Product Type : Disk
Number of LUN(s) : 1
Status : Online
-----------------------------------------------------------------------------
Path : 0
Target : 5
Device ID : 0x85
Port ID : 74-55-13
Product Vendor : DGC
Product ID : LUNZ
Product Revision : 0217
Node Name : 50-06-01-60-88-20-12-BB
Port Name : 50-06-01-60-08-20-12-BB
Product Type : Disk
Number of LUN(s) : 1
Status : Online
-----------------------------------------------------------------------------
#**************************************************************#
# INSTALLATION SUCCESSFUL!! #
# QLogic HBA Linux driver installation completed. #
#**************************************************************#
File modifications on SLES hosts
An example of the installation script's modifications to the file
/etc/sysconfig/kernel is as follows:
INITRD_MODULES="cciss reiserfs qla2xxx_conf qla2xxx
qla2300"