Installation guide

60
EMC Host Connectivity with QLogic Fibre Channel and iSCSI (HBAs) and (CNAs) for the Linux Environment
Installing and Configuring the Linux Host with the QLogic Driver
Configuration saved. Changes have been saved to persistent storage.
Please reload the QLA driver module/rebuild the RAM disk for the
saved configuration to take effect.
Configuration saved. Changes have been saved to persistent storage.
Please reload the QLA driver module/rebuild the RAM disk
for the saved configuration to take effect.
Saved copy of /etc/sysconfig/kernel as
/usr/src/qlogic/v8.00.03-1/backup/kernel-2.6.5-7.151-smp-042905-124100.bak
Saved copy of /etc/modprobe.conf.local as
/usr/src/qlogic/v8.00.03-1/backup/modprobe.conf-2.6.5-7.151-smp-042905-124100.ba
k
Saved copy of /boot/initrd-2.6.5-7.151-smp as
/usr/src/qlogic/v8.00.03-1/backup/initrd-2.6.5-7.151-smp-042905-124100.bak
QLA2XXX -- Rebuilding ramdisk image...
Ramdisk created.
Reloading the qlogic FC HBA drivers....
Unloaded module qla2300
Loading module qla2xxx_conf version: v8.00.03....
Loaded module qla2xxx_conf
Loading module qla2xxx version: v8.00.03....
Loaded module qla2xxx
Loading module qla2300 version: v8.00.03....
Loaded module qla2300
Target Information on all HBAs:
==============================
-----------------------------------------------------------------------------
HBA Port 1 - QLA2340 Port Name: 21-00-00-E0-8B-13-C0-1E Port ID: 6A-1A-13
-----------------------------------------------------------------------------
Path : 0
Target : 0
Device ID : 0x81
Port ID : 6A-2E-13
Product Vendor : DGC
Product ID : LUNZ
Product Revision : 0206
Node Name : 50-06-01-60-90-60-12-5C
Port Name : 50-06-01-6A-10-60-12-5C
Product Type : Disk
Number of LUN(s) : 1
Status : Online
-----------------------------------------------------------------------------
Path : 0
Target : 1
Device ID : 0x82
Port ID : 6C-1B-13