Installation guide

Installation instructions for the out of kernel QLogic driver
59
Installing and Configuring the Linux Host with the QLogic Driver
alias scsi_hostadapter2 qla2xxx
alias scsi_hostadapter3 qla2300
SLES examples An example of the console output reported by the QLogic installation
script on SLES host is as follows:
./qlinstall -i -dp
#*********************************************************#
# QLogic HBA Linux Driver Installation #
# Version: 1.00.00b2pre4 #
#*********************************************************#
Kernel version: 2.6.5-7.151-smp
Distribution: SUSE LINUX Enterprise Server 9 (i586)
Found QLogic Fibre Channel Adapter in the system
1: QLA2312
Installation will begin for following driver(s)
1: qla2xxx version: v8.00.03
Preparing...
##################################################
qla2xxx
##################################################
QLA2XXX -- Building the qla2xxx driver...
\
QLA2XXX -- Installing the qla2xxx modules to
/lib/modules/2.6.5-7.151-smp/kernel/drivers/scsi/qla2xxx/...
Setting up QLogic HBA SNIA API library...
Unloading any loaded drivers
Unloaded module qla2300
Unloaded module qla2xxx_conf
Loading module qla2xxx_conf version: v8.00.03....
Loaded module qla2xxx_conf
Loading module qla2xxx version: v8.00.03....
Loaded module qla2xxx
Loading module qla2300 version: v8.00.03....
Loaded module qla2300
Installing scli....
Preparing...
##################################################
scli
##################################################
Installation completed successfully.
Building default persistent binding using SCLI