Installation guide

EMC Host Connectivity with QLogic Fibre Channel and iSCSI (HBAs) and (CNAs) for the Linux Environment

Introduction

Zoning

When using Linux hosts in a fabric environment, the zoning must be

set up as single initiator and single target zoning. A single

initiator/single target zone is composed of one adapter and one EMC

storage array port. Storage array ports can be shared among adapters;

however, each adapter must be in its own zone.

Note: Multi-initiator zones are not recommended in a Linux fabric

environment.

EMC storage array-specific settings

Refer to the EMC Host Connectivity Guide for Linux, available at

http://Powerlink.EMC.com, for EMC storage array-specific settings.