User`s guide

6 – SANsurfer Control iX

Configuring the QLA4010/4010C HBA

6-24 PRELIMINARY IS0053302-00 7

To set the DNS server address automatically through DHCP, select the Obtain DNS

server address automatically (via DHCP) radio button.

6.4.2.2

Setting the DNS Server Address Manually

To set the DNS server address manually, perform the following steps:

1. Select the Use the following DNS server address radio button.

2. Enter the Preliminary DNS IP address.

NOTE: At the time of publication, the Secondary DNS IP address field is not

supported.

6.4.3

Enabling SLP

Perform the following steps to enable SLP:

1. Select the Enable SLP check box.

2. Set the directory agent (DA) address automatically, manually, or through the

discovery process:

a. Select the Obtain DA address automatically (via DHCP) radio button to

set the DA address automatically.

b. Select the Use the following DA address radio button to set the DA address

manually. Enter the DA address.

c. Select the Discover DA radio button to find the DA address using the

discovery process.

6.4.4

Enabling iSNS

NOTE: This feature is not supported on Red Hat Linux systems.

Perform the following steps to enable iSNS:

1. Select the Enable iSNS check box.

2. Set the iSNS server address automatically or manually:

a. Select the Obtain iSNS server address automatically (via DCHP) radio

button to set the iSNS server address automatically.

b. Select the Use the following iSNS server address to set the iSNS server

address manually. Enter the IP address.

NOTE: At the time of publication, the Hostname field is not supported.