User`s guide

6 – SANsurfer Control iX
Getting Started
IS0053302-00 7 PRELIMINARY 6-21
Q
NOTE: The default SANsurfer Control iX application access password is config.
Change this password after installation to ensure that security is not
compromised.
Perform the following steps to set the application access password for a host:
1. In the SANsurfer Control iX main window HBA tree, select the host for which
you want to set the application access password.
2. Click the Host Security tab. The Host Security tabbed page displays (see
figure 6-22). The host name displays at the top of the tabbed page.
Figure 6-22. Host Security Tabbed Page
3. In the Update Application Configuration Access section, do the following to
modify the SANsurfer Control iX application access password:
a. In the Old Password box, type the current password.
b. In the New Password box, type the new password.
c. In the Verify Password box, type the new password again to confirm the
new password.
4. Do one of the following:
❑
Click Apply to update the application access password.
❑
Click Clear Fields to clear the typed entries in the Host Security tabbed
page text boxes.