User`s guide

6 – SANsurfer Control iX
Getting Started
IS0053302-00 7 PRELIMINARY 6-7
Q
6.3.1.2
Starting SANsurfer Control iX on Red Hat Linux
On a Red Hat Linux system, perform the following steps to start the SANsurfer
Control iX GUI. When done, the SANsurfer HBA Manager main window displays
(see section 6.3.2).
1. Ensure that you are in a graphical user environment.
2. Open a command terminal.
3. Change to the directory where the SANsurfer Control iX application is installed.
The default location is /opt/QLogic_Corporation/SANsurfer_Control_iX.
4. Type ./SANsurfer_Control_iX and then press ENTER to start the
SANsurfer HBA Manager GUI.
6.3.2
Main Window and Window Navigation
This section provides an overview of SANsurfer Control iX, including how to navigate
through the screens and tabbed pages. The purpose of each screen is described.
See sections 6.4 through 6.7 for information on using SANsurfer Control iX to view
and configure the HBAs.