User`s guide

4 – Windows Server 2003 Driver Installation
Installing the Driver
4-4 PRELIMINARY IS0053302-00 7
Q
11. Select Search for the best driver in these locations. Type or browse the path
of the QLogic driver directory. For example:
A:\
12. Click Next.
13. The Hardware Installation dialog box displays, click Continue Anyway.
14. In the Completing the Found New Hardware Wizard dialog box, click Finish.
4.4.3
Updating the Existing Driver
Perform the following steps if the QL4010.SYS driver is already installed and you
want to install an updated version of the driver:
1. To start the Device Manager, click Start, point to Settings, click Control Panel,
double-click the System applet, select the Hardware tab, and click the Device
Manager button.
2. Use the scroll bar to scroll down the list of hardware types. Double-click SCSI
and RAID Controller.
3. Double-click QLogic QLA4010 PCI iSCSI Adapter from the devices list. Click
Properties.
4. Click the Driver tab, then click Update Driver to start the Upgrade Device
Driver Wizard. Click Next.
5. Select Install from a list or specific location (Advanced). Click Next.
6. Select Don’t search I will choose the driver to install. Click Next.
7. Insert the QLogic driver disk created in section 4.3. Click Have Disk.
8. In the Install From Disk dialog box, in the Copy manufacturer’s files from
field, type or browse the path to the QLogic driver directory. For example:
A:\
Click OK.
9. The Hardware Update Wizard/Select a Device Driver dialog box displays.
Click Next.
10. In the Upgrade Device Driver Wizard/Start Device Driver Installation dialog
box, click Next.
11. The Hardware Installation dialog box displays, click Continue Anyway.
12. In the Hardware Update Wizard/Completing the Hardware Update Wizard
dialog box, click Finish.