User`s guide

4 – Windows Server 2003 Driver Installation

Installing the Driver

IS0053302-00 7 PRELIMINARY 4-3

After all the standard devices have been loaded, press S to Specify Additional

Device. Go to step 5.

3. If you are booting from the Windows installation floppy disks, after the standard

devices have been detected and configured, press S to Specify Additional

Device.

4. Select Other and press ENTER.

5. Insert the QLogic driver disk created in section 4.3 and press ENTER.

6. Select the QLogic QLA4010 PCI iSCSI Adapter, then press ENTER.

7. Continue with standard installation procedure.

4.4.2

Adding the QLA4010/4010C HBA to the Existing OS

NOTE: The QLA4010 adapter is a multifunction device. When installed in a

plug-and-play system, Windows Sever 2003 detects two functions for

each adapter: ethernet controller and network controller.

Perform the following steps to add the QL4010.SYS driver to an existing

Windows Sever 2003 system:

1. Install the QLA4010/4010C HBA in the appropriate slot on your computer (see

section 2.1).

2. Restart or power up your computer. Log in as Administrator.

3. When your computer powers up, Windows Sever 2003 detects the newly

installed device, then displays the Found New Hardware with Ethernet

Controller message. The Found New Hardware Wizard program is launched

to begin installing the QL4010NULL?

should be QLA4010.sys? driver for the

QLA4010/4010C HBA.

4. Select Install from a list or specific location (Advanced). Click Next.

5. Select Search for the best driver in these locations. Type or browse the path

of the QLogic driver directory. For example:

A:\

6. Insert the QLogic driver disk created in section 4.3. Click Next.

7. When the Security Alert—Driver Installation dialog box displays, click Yes

8. In the Completing the Found New Hardware Wizard dialog box, click Finish.

9. Windows Sever 2003 displays the Found New Hardware Wizard with

Network Controller message. The Found New Hardware Wizard program

is launched to begin installing the QL4010.SYS driver for the QLA4010.

10. Select Install from a list or specific location (Advanced). Click Next.