Installation guide

2
Installing and Configuring the QLogic QLA4010 iSCSI HBA (TOE)
2-9
Planning, Miscellaneous Procedures, and Troubleshooting
You can add as many targets as you need to add. If you need to enter
CHAP security for any of the targets, click Config Authentication at
the bottom of the dialog, as shown in Figure 2-6 on page 2-8, to get
the Authentication Configuration dialog, as shown in Figure 2-8.
Figure 2-8 Authentication Configuration, CHAP Tab
On the Authentication Configuration, CHAP tab, you can set a
default name and secret for all targets, or you can click the individual
target and enter unique name and secret settings for that target. Note
that initiator CHAP settings do not get masked and could be compro-
mised if an unauthorized user accesses the SANsurfer workstation.