Installation guide

2
2-6
EMC Fibre Channel and iSCSI with QLogic HBAs in the Windows Environment
Planning, Miscellaneous Procedures, and Troubleshooting
Figure 2-4 Download Firmware Dialog
The firmware will be loaded to the specified HBA. After loaded,
SANsurfer will reset the HBA so that the new firmware will take
effect.
Boot BIOS for the iSCSI HBA can be loaded in a similar fashion.
From the SANsurfer iSCSI HBA Manager, HBA Option dialog, click
the BIOS tab, as shown inFigure 2-5 on page 2-7.