Installation guide

2
Installing and Configuring the QLogic QLA4010 iSCSI HBA (TOE)
2-5
Planning, Miscellaneous Procedures, and Troubleshooting
steps:
1. Ping successfully to the iSNS server using Diagnostics tab from
the SANsurfer iSCSI HBA Manager dialog.
2. Go to iSNS server and iSNS server icon in the control panel or
desktop.
3. Open Discovery Domain and confirm that both the QLA4010
and target ports are registered with the domain.
To update firmware on your iSCSI HBA, click the Firmware tab on
the HBA Options dialog, as shown in Figure 2-3.
Figure 2-3 SANsurfer iSCSI HBA Manager, HBA Options, Firmware Tab
Click Select Firmware to Download. In the dialog that appears, as
shown in Figure 2-4 on page 2-6, type in the path to the firmware file
that you want to load to the HBA, and click Save.