Installation guide

Planning, Miscellaneous Procedures, and Troubleshooting

2-1

Invisible Body Tag

This appendix contains information on planning, miscellaneous

procedures, and troubleshooting problems.

◆ Installing and Configuring the QLogic QLA4010 iSCSI HBA

(TOE)....................................................................................................2-2

◆ Booting from SAN with QLogic QLA4010 and Microsoft

Initiator ..............................................................................................2-11

◆ Boot-from-SAN Configuration Restrictions.................................2-13

◆ Setting Up External Boot for IBM Blade Server HS40 (8839).....2-14

◆ BladeServer Restrictions .................................................................2-15

◆ Editing the Windows Time Out Value ..........................................2-16

◆ Manually Installing the HBA Driver – Advanced Users ...........2-17

◆ Extended Error Logging by QLogic Drivers................................2-22

◆ Procedure for Replacing a QLogic HBA in Stratus ftServers

without Rebooting ...........................................................................2-23

◆ Set the HBA FC-AL Loop ID ..........................................................2-26

◆ Special Instructions for CLARiiON CX200-Series Direct-

Connect Dual-Host Clustering Configurations...........................2-28

◆ Understanding Persistent Binding in a Fabric Environment ....2-30

◆ Problems and Solutions...................................................................2-33

◆ Known Issues....................................................................................2-36

Planning, Miscellaneous

Procedures, and

Troubleshooting