Installation guide

1
1-60
EMC Fibre Channel and iSCSI with QLogic HBAs in the Windows Environment
Installation and Configuration
Figure 1-52 Connect to the Host
6. In the "Enter Hostname or IP Address" field, perform one of the
following:
• Select localhost to connect to the machine on which you are
using the SANsurfer FC HBA Manager GUI.
or
• Type or select a remote machine. You can use the host name or
the machine's IP address.
7. Do one of the following:
• Click Connect to initiate the connection. If successful, the host
and its HBAs display in the HBA tree. If you entered a new
remote host and the connection was successful, its name is
also added to the Enter Hostname or IP Address box
drop-down list.
• Click Cancel to abort the connection process and return to the
SANsurfer FC HBA Manager main window, as shown in
Figure 1-53 on page 1-61.
• Click Clear to delete all machines on the list except localhost.
(The local machine cannot be deleted.)