Installation guide

1-56

EMC Fibre Channel and iSCSI with QLogic HBAs in the Windows Environment

Installation and Configuration

Updating the Flash BIOS Using SANsurfer FC HBA Manager

Note: The SANblade Manager flash BIOS update feature is available only on

Windows 2000/Server 2003.

WARNING

Changing flash BIOS incorrectly can cause serious damage to your

system.

Perform the following steps to update the flash BIOS:

1. In the SANblade Manager main menu HBA tree, select the

adapter.

If you want to configure multiple adapters with the same settings,

hold the CTRL key while selecting multiple adapters. The

adapters must be in the same series:

QLA231x HBAs, QLA234x HBAs, or QLA22xx HBAs.

Note: Only the Settings (Adapter Settings and Advanced Adapter

Settings) and Utilities tabbed pages can be configured for multiple

adapters; therefore, the remaining tabbed pages do not display when

multiple adapters are selected.

2. Click the Utilities tab. The Utilities tabbed page displays (see

Figure 1-50 on page 1-57).

Note: If you selected multiple adapters, the Save NVRAM, Save BIOS

radio buttons do not display. These options cannot be performed with

multiple adapters.