Installation guide

1
1-46
EMC Fibre Channel and iSCSI with QLogic HBAs in the Windows Environment
Installation and Configuration
Figure 1-41 SANsurfer Driver Selection
This window presents three choices:
◆ Default Driver
This is the default selection. This selection will use the driver located
on the CD-ROM or the SANsurfer Install Wizard for Windows file.
The latest driver versions are listed in the EMC support matrix. Use
this option if you have downloaded the kit from the QLogic web site.
◆ From the QLogic website
The selection will automatically search the QLogic web site for the
latest driver. An Internet connection is required. Use this selection if
you are upgrading your HBA drivers to a newer version.
◆ Browse
Use this option if you have previously downloaded the driver file
and stored it on your hard drive.