Installation guide

1
1-40
EMC Fibre Channel and iSCSI with QLogic HBAs in the Windows Environment
Installation and Configuration
7. Read the license agreement. (Press Pg Dn as necessary to scroll
through the text.) To accept the agreement, press F8.
Setup inspects your computer's hardware configuration. The
setup screen displays disk partition information (if your system
already contains partitions), or lets you create a new partition.
(Refer to Figure 1-38.)
The Windows 2000 boot LUN cannot exceed 7.8 GB unless INT-13
extensions are enabled in the HBA BIOS. (Refer to Microsoft Knowledge
Base article Q240672.)
Figure 1-38 Existing Partitions