Installation guide

1
Booting from the External Storage Array
1-27
Installation and Configuration
Figure 1-23 QLogic efiutil all Upgrade
The utility will upgrade EFI boot code drivers on all HBAs installed
in the server and return to the EFI shell when complete (as show in
Figure 1-23). If any errors are reported during this process, verify
that the correct EFI boot code driver for your HBA has been copied to
your installation media.
EFI-compatible firmware must now be loaded onto the HBA(s). Type
efiutil all rw=qlNNNNfw.bin, where NNNN refers to the chipset
version on the HBA, (in the example shown in Figure 1-21 on