Installation guide

1
Booting from the External Storage Array
1-21
Installation and Configuration
To exit the Fast!UTIL configuration utility, select Exit Fast!UTIL and
press Enter. The system will now reboot.
During the subsequent reboot, the QLogic BIOS banner screen should
show the array and LUN that were specified as a boot-capable LUN
(as shown in Figure 1-17).
Figure 1-17 QLogic BIOS Banner Screen
At this point, the OS Installation can begin using this LUN as the boot
volume.
EFI (IA64 Itanium and some x64 servers) system firmware configuration
Prior to booting the server, ensure that media (USB memory drive,
CD-ROM, or floppy) which contains the QLogic EFI boot code/utility
is physically present in the system.
Following POST of the server, the Firmware Boot Manager (similar
to Figure 1-18 on page 1-22) menu will be displayed. Using the arrow
keys, select the option for EFI Shell and press Enter.