Installation guide

1
1-20
EMC Fibre Channel and iSCSI with QLogic HBAs in the Windows Environment
Installation and Configuration
Figure 1-14 Selectable Boot Settings Window
Press Esc to return to the previous Configuration Settings dialog.
Press Esc on the Configuration Settings dialog. A dialog will appear
to warn of a configuration change (as shown in Figure 1-15).
Figure 1-15 Warning Dialog
If the settings are correct, select Save changes to return to the initial
Fast!UTIL Options dialog. Otherwise, press Esc to make additional
changes, or select Do not save changes and press Enter to return to
the initial Fast!UTIL Options window (as shown in Figure 1-16).
Figure 1-16 Fast!Util Options Window