Installation guide

Installing the HBA into Your Server

1-9

Installation and Configuration

QLogic offers HBAs for each bus/slot type available. Table 1-1 shows

each of the EMC-supported QLogic HBAs, and their respective slot

requirements. Be sure to consult both your server user guide and

QLogic to insure that the HBA you want to use is compatible with

your server’s bus.

Keep in mind that some of the older HBAs are tall (also referred to as

full-height) and may not fit into a server with a low-profile chassis.

These factors must be considered before implementing your

configuration to avoid unnecessary delays and possible equipment

swaps or returns.

Table 1-1 EMC-supported QLogic HBAs

HBA PCI Spec BUS Length Power Slot Key

QLA2200F PCI 2.1 64-bit 3.3V, 5V Universal

QLA200 PCI-X 1.0a & PCI 2.2 32-bit 3.3V, 5V 3.3V

QLA2310F PCI-X 1.0a & PCI 2.2 64-bit 3.3V, 5V Universal

QLA2340LF PCI-X 1.0a & PCI 2.2 64-bit 3.3V, 5V Universal

QLA2342LF PCI-X 1.0a & PCI 2.2 64-bit 3.3V, 5V Universal

QLE2360 PCI Express x4 lane 3.3V n/a

QLE2362 PCI Express x4 lane 3.3V n/a

QLA2460 PCI-X 2.0a & PCI 2.3 64-bit 3.3V 3.3V

QLA2462 PCI-X 2.0a & PCI 2.3 64-bit 3.3V 3.3V

QLE2460 PCI Express x4 lane 3.3V n/a

QLE2362 PCI Express x4 lane 3.3V n/a