Installation guide

A
QLogic SANsurfer SANblade Manager
A-3
Third-Party Software
SANsurfer Version
History
SANsurfer versions include:
◆ 2.0.21 — Initial Release
The SANsurfer software is not multipath-aware, and as such may
misreport HBA targets that are configured in multipath. This does not
affect the use of the tool; however, it will accurately report targets only on
ports that own an active LUN0.
◆ 2.0.25 — Added target persistent binding capability and display
correction for LUNs on non-owning SP. (This functionality is
supported by QLogic; all usage questions and support issues
should be directed to QLogic.)
SANsurfer 2.0.25 cannot be used to upgrade to BIOS 1.4x. Until a later
SANsurfer is available, you will need to use the procedureUpdating Using
a DOS Boot Diskette on page 2-11 to perform this upgrade.
This version of SANsurfer may display HBA options under different
menu names than appear in the HBA Ctrl-Q menu, as well as in previous
SANsurfer versions. All user-configurable options are still accessible.