Installation guide

2
Procedure for Replacing a QLogic HBA in Stratus ftServers without Rebooting
2-25
Planning, Miscellaneous Procedures, and Troubleshooting
10. Run symmask refresh to update the director profile tables (in
cache) from the database.
11. Scan for hardware changes from the Windows device manager.
12. Execute the following commands from a command window:
powermt restore
powermt display
At this point, two HBAs should be present in the display and the
FC HBA’s should be duplexed in the ftSMC. It may be necessary
to repeat steps 9 and 10.