Product guide

60
EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris Environment
Configuring a Boot Device on the EMC Storage Array
Example:
" /ssm@0,0/pci@18,600000/pci@1/QLGC,qla@4" select-dev
16. To set the correct topology, type the following and press ENTER:
•Fabric: 1 set-connection-mode
•Loop:2 set-connection-mode
17. To display all Fibre Channel devices along with WWPN of the
target SP from which you are booting, issue the show-children
command.
18. Set the boot ID of the new boot device:
a. Make note of the actual WWPN, DID, or ALPA returned from
the show-children comand, and copy down the
corresponding boot entry.
b. Set the boot ID:
<WWPN> <TargetID> <LUN #> set-boot-id
Example:
50060160006001b7 82 0 set-boot-id
c. Check the Loop ID of the adapter:
show-adapter-loopid
d. Set the Loop ID:
7c set-adapter-loopid
e. Issue an unselect-dev.
19. Create an alias for the new boot device:
nvalias emcpower0a /ssm@0,0/pci@18,600000/pci@1/QLGC,qla@4/sd@0,0:a
nvstore
20. You are now ready to boot:
unselect-dev
reset-all
boot emcpower0a