Product guide

56
EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris Environment
Configuring a Boot Device on the EMC Storage Array
b. Set the boot ID:
<WWPN> <TargetID> <LUN #> set-boot-id
Example: If the WWN is 500601684004c2f7, the LoopID is 82
and the LUN is b, you would enter:
500601684004c2f7 82 b set-boot-id
c. Check the loop ID of the adapter:
show-adapter-loopid
d. Set the loop ID:
7c set-adapter-loopid
e. Issue an unselect-dev.
18. Create an alias for the new boot device:
nvalias emcboot /ssm@0,0/pci@18,600000/pci@1/QLGC,qla@5/sd@0,0:a
nvstore
19. You are now ready to boot:
unselect-dev
reset-all
boot emcboot
Booting from an emcpower device
Follow these steps to use an emcpower device:
1. Select the LUN that will be used for booting by running the
powermt display command.
Example:
powermt display dev=0