Product guide

52
EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris Environment
Configuring a Boot Device on the EMC Storage Array
Troubleshooting
This section describes some problems that could occur, as well as
actions to be taken.
Problem Cause Solution
During boot
process, cannot
mount or fsck.
/etc/vfstab file
on the Symmetrix
boot device did not
update correctly.
At the
OK> prompt, type
boot disk
and press ENTER
to boot the system using
the internal disk. Correct
the file
/etc/vfstab on
the Symmetrix boot device.
After entering
'boot
Symmdisk', a
message states
that the loaded
file is not
executable.
There is probably
not a boot disk on
the target disk, or
the copy from local
to Symmetrix
device was not
successful.
At the OK> prompt, type
boot disk and press
ENTER to boot the system
using the internal disk.
Recreate the Symmetrix
boot disk again.