Product guide

50
EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris Environment
Configuring a Boot Device on the EMC Storage Array
Example: " /pci@1f,4000/QLGC,qla@1" select-dev
The result is similar to this:
b. At the OK> prompt, type show-children and press ENTER to
display the Symmetrix WWN and loop ID of the boot disk.
The result is similar to this:
Write down the WWN, loopId, and Lun of the boot device.
c. At the OK> prompt, set up the boot ID, by typing:
<WWN> <TargetId> <Lun> set-boot-id and pressing ENTER
Example:
50060482c3a0d833 0 0 set-boot-id
The result is similar to this:
d. At the OK> prompt, type unselect-dev and press ENTER.
6. Set up a new alias for your new boot disk:
a. At the OK> prompt, type nvalias your_alias <your device>
and press ENTER.
Example:
nvalias symmdisk /pci@1f,4000/QLGC,qla@4/sd@0,0
b. At the OK> prompt, type nvstore and press ENTER to store
your new boot name.
QLogic QLA2200 Fibre Channel Host Adapter FCode
version 1.15 01/03/01
Loading QLA2200 firmware - version 2.01.26
Waiting for Fibre Channel link up. - link is up
*
******************* Local Loop Devices ***********************
a
pter loopId - 7d
D
evice AL-PA loopId 0 Hard-addr 0 Port WWN 50060482c3a0d833
L
un 0 DISK EMC SYMMETRIX 5567
L
un 1 DISK EMC SYMMETRIX 5567
L
un 2 DISK EMC SYMMETRIX 5567
-
--
Calculating NVRAM checksum, please wait... done
Boot device login successful
Boot WWN - 50060482 c3a0d833 WWPN - 50060482 c3a0d833 Id - 0 Lun -
0