Product guide

EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris Environment
5
Preface
As part of an effort to improve and enhance the performance and capabilities
of its product line, EMC from time to time releases revisions of its hardware
and software. Therefore, some functions described in this document may not
be supported by all revisions of the software or hardware currently in use.
For the most up-to-date information on product features, refer to your
product release notes.
If a product does not function properly or does not function as described in
this document, please contact your EMC representative.
This document describes the procedures for installing an EMC-approved
QLogic host bus adapter (HBA) into a Sun Solaris host environment and
configuring the host for connection to an EMC storage array over Fibre
Channel and Configuring a boot device on the EMC storage array.
Note: Review the EMC Support Matrix for the latest information on approved
HBAs and drivers.
Conventions used in
this guide
EMC uses the following conventions for notes and cautions.
Note: A note presents information that is important, but not hazard-related.
IMPORTANT
!
An important notice contains information essential to operation of
the software.