Product guide

Updating the HBA FCode
37
Installing and Configuring the HBA and Driver
6. Double-click the hostname pin located at the upper left of the GUI
to display all QLogic HBAs installed in the host.
7. Click the adapter on which you want to update the FCode.
8. At the Tab dialog, click Utilities.
9. Enable Update FCode.
10. Click Select Input File.
11. Select the appropriate filename:
12. Click Open.
The SANblade GUI displays Last Input File Selected: and an
entry similar to the following:
/QLA234x_Fcode/ifp2312.prom
13. Click Update to update the FCode.
14. Repeat steps 7 through 13 for any other HBA that needs the
FCode updated.
15. On the SANblade GUI main window’s File menu, select Exit to
exit the GUI.
16. Reboot the host with the reconfigure option:
reboot -- -r
HBA Model Look in: Filename
QLA2200F-EMC
QCP2202F-E
/QLA2200_Fcode ifp2200.prom
QLA2202FS-E /QLA2202FS_Fcode 2202fs.prom
QLA2300F-E-SP /QLA2300_Fcode ifp2300.prom
QLA2340-E-SP
QLA2342-E-SP
/QLA234x_Fcode ifp2312.prom