Product guide

34
EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris Environment
Installing and Configuring the HBA and Driver
3. Go into the appropriate HBA directory; then uncompress and
untar the FCode file.
4. Use the format utility to list all of your EMC storage array
devices. Write down all storage array device paths in your
system.
Example: At the
% prompt, type format and press ENTER. The
display is similar to this:
The device path of QLogic adapters in your system will be:
/devices/pci@8,700000/scsi@1
/devices/pci@8,700000/fibre-channel@2
/devices/pci@8,600000/QLGC,qla@1
The device paths containing the word scsi and fibre-channel
belong to the HBA that has the x86 BIOS installed. The device
path containing word
QLGC,qla belonging to the HBA that has
the FCode installed.
Searching for disks... done
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
/pci@8,600000/SUNW,qlc@4/fp@0,0/ssd@w21000004cf72febf,0
1. c2t1d0 <EMC-SYMMETRIX-5669 cyl 2148 alt 2 hd 15 sec 64>
/pci@8,700000/scsi@1/sd@1,0
2. c2t1d1 <EMC-SYMMETRIX-5669 cyl 2148 alt 2 hd 15 sec 64>
/pci@8,700000/scsi@1/sd@1,1
3. c3t2d0 <EMC-SYMMETRIX-5669 cyl 2148 alt 2 hd 15 sec 64>
/pci@8,700000/fibre-channel@2/sd@2,0
4. c3t2d1 <EMC-SYMMETRIX-5669 cyl 2148 alt 2 hd 15 sec 64>
/pci@8,700000/fibre-channel@2/sd@2,1
5. c4t3d0 <EMC-SYMMETRIX-5669 cyl 2148 alt 2 hd 15 sec 64>
/pci@8,600000/QLGC,qla@1/sd@3,0
6. c4t3d1 <EMC-SYMMETRIX-5669 cyl 2148 alt 2 hd 15 sec 64>
/pci@8,600000/QLGC,qla@1/sd@3,1
...