Product guide

Installing the HBA driver
17
Installing and Configuring the HBA and Driver
• persistent-binding-configuration
• fast-error-reporting
• extended-logging
4. Remove the old driver:
a. The first step depends on the HBA and Solaris Operating
System (OS):
b. Type
y and press ENTER when prompted:
Do you want to remove this package?
c. A message describes the driver and prompts you:
Do you want to continue with the removal of this package [y,n,?,q]
Type y and press ENTER.
d. Remove the SANBlade Control FX GUI utility:
5. Install the driver as described under “Installing the driver” on
page 12.
6. After the driver is installed, restore any customized NVRAM
parameter settings in the backup file (refer to step 2) or the
parameters in step 3 to
/kernel/drv/qla2x00.conf.
7. Edit any necessary files as described under “Configuring host
files” on page 19.
HBA: OS version: Enter:
QLA2200F-EMC
QLA2202FS-E
QCP2202F-E
2.6
pkgrm QLA2200-1
7
pkgrm QLA2200-2
8, 9
pkgrm QLA2200-3
QLA2300F-E-SP
QLA2340-E-SP
QLA2342-E-SP
2.6
pkgrm QLA2300-1
7
pkgrm QLA2300-2
8, 9
pkgrm QLA2300-3
OS version: Enter:
2.6 or 7
pkgrm scfx2-6
8 or 9
pkgrm scfx2-8