Product guide

Installing the HBA driver
13
Installing and Configuring the HBA and Driver
2. Install the driver into the host:
A list of available packages appears, similar to this QLA2300
example:
Select an HBA driver and press ENTER.
3. You are prompted to select the directory into which the driver
will be installed. For example:
Press ENTER to accept the default.
Press ENTER to accept the default.
Press ENTER to accept the default.
If HBA is: Enter:
QLA2200F-EMC
QLA2202FS-E
QCP2202F-E
pkgadd -d qla2200.solaris_pkg
QLA2300F-E-SP
QLA2340-E-SP
QLA2342-E-SP
pkgadd -d qla2300.solaris_pkg
The following packages are available:
1 QLA2300 QLogic QLA2300 driver
(sparc) Solaris, Rev=4.17
2 QLSDMLIB QLogic SNIA Library (32 and 64 bit) for SNIA 1.0
(sparc) Solaris 7-8-9-10, Rev 3.10
3 QLSDMLIB6 QLogic SNIA Library (32 bit) for SNIA 1.0
(sparc) Solaris 2.6, Rev 3.10
Select package(s) you wish to process (or 'all’ to process
all packages). (default: all) [?,??,q]:
Processing package instance <QLA2300> from </qlogic_driver>
QLogic QLA2300 driver (sparc) Solaris, Rev=4.17
Copyright (c) 1996-2005, by QLogic Corporation. All rights reserved.
Where do you want the driver object installed (default=/kernel/drv):
Where do you want the driver utilities installed
(default=/opt/QLogic_corporation/drvutil/qla2300):
Where do you want the drivers conf file backups placed
(default=/opt/QLogic_corporation/confbkup):