User`s guide

1
E
1 General
This card (optional device) is designed to provide a fibre channel interface for a
PRIMERGY server ("the server")
The card has the following features:
･Capable of high-speed data transfer at a maximum rate of 200 megabytes per
second (Full Duplex).
･ You can place the device away from the server.
･ Uses thin and light cables so that you can install them easily.
Here are the principal specifications of the card.
Host bus type
Interface
Data transfer rate
Data transfer system
Fibre channel type
Topology
Connector/Transter
system
Data transfer rate
Controller LSI
Card size
PCI bus, Rev. 2.2 64bit/66MHz
Max. 528 MB/sec. (When mounted in a 64-bit PCI slot)
Max. 264 MB/sec. (When mounted in a 32-bit PCI slot)
Bus master DMA (three channels)
Fibric/FC-AL (Arbitrated Loop)
Optical interface, SC Duplex Connector, Multi-mode,
non-OFC
Max. 200 MB/sec (Full Duplex)
ISP2200A
17.78 × 10.67 cm (connector and protrusions not
included)