User`s guide

7 – Setting Up Connections
Deleting Persistent Configuration Data
FS0054601-00 E 7-31
Q
7.7.2
Deleting Device Persistent Configuration Data
Perform the following steps to delete the persistent configuration data for a device
and its LUNs:
1. Do one of the following:
❑ From the SANblade Manager main window HBA tree, right-click the device
(or LUN connected to the device). From the pop-up menu, select Device
Persistent Configuration Data.
❑ From the Fibre Channel Configuration dialog box Device menu, select
Persistent Configuration Data.
The Fibre Persistent Configuration Editor displays the devices (see
figure 7-14).
Figure 7-14. Fibre Persistent Configuration Editor for Devices
For each device connected to the adapter, the Fibre Persistent Configuration
Editor displays the device number and device world wide node name.
2. Do one of the following:
❑ Delete one or more entries as follows:
a. Select the device entries that you want to delete.
b. Click Delete to remove the entries.
c. The Security Check dialog box displays. In the Enter Password box,
type the password. Click OK.
NOTE: Changes made to the persistent configuration are final. If you do
not want the changes, reconfigure the host (see section 7.2).
❑ Click Cancel to not delete an entry.