User`s guide

7 – Setting Up Connections
Deleting Persistent Configuration Data
7-30 FS0054601-00 E
Q
7.7.1
Deleting Adapter Persistent Configuration Data
Perform the following steps to delete the persistent configuration data for an adapter
and its devices and LUNs:
1. Do one of the following:
❑ From the SANblade Manager main window HBA tree, right-click the adapter
(or its host). From the pop-up menu, select Adapter Persistent
Configuration Data.
❑ From the Fibre Channel Configuration dialog box Adapter menu, select
Persistent Configuration Data.
The Fibre Persistent Configuration Editor displays the adapters (see
figure 7-13).
Figure 7-13. Fibre Persistent Configuration Editor for Adapters
For each adapter connected to the host, the Fibre Persistent Configuration
Editor lists the adapter number and the adapter world wide port name.
2. Do one of the following:
❑ Delete one or more entries as follows:
a. Select the adapter entries that you want to delete.
b. Click Delete to remove the entries.
c. The Security Check dialog box displays. In the Enter Password box,
type the password. Click OK.
NOTE: Changes made to the persistent configuration are final. If you do
not want the changes, reconfigure the host (see section 7.2).
❑ Click Cancel to not delete an entry.