User`s guide

7 – Setting Up Connections
Viewing Adapter, Device, and Path Information
FS0054601-00 E 7-23
Q
7.4.1
Viewing Adapter Information
Perform the following steps to view adapter information from the Fibre Channel
Configuration dialog box and LUN Configuration dialog box:
1. Right-click in the Adapter n column heading. From the pop-up menu, select
Adapter Information. The Adapter Information dialog box displays (see
figure 7-8).
Figure 7-8. Adapter Information Dialog Box
The following information displays:
❑ Number. Adapter number
❑ Type. Type of adapter. 2200 indicates a QLA22xx adapter; 2300 indicates
a QLA23xx adapter
❑ Serial Number. Serial number of the adapter
❑ Driver Version. Version of the adapter driver on the host that controls the
adapter
❑ Firmware Version. Version of the adapter firmware on the host that controls
the adapter
❑ BIOS Version. BIOS version on the adapter
❑ Node Name. World wide adapter node name
❑ Port Name. World wide adapter port name
❑ Total Number of Devices. Number of devices attached to the adapter
2. Click OK to close the Adapter Information dialog box.