User`s guide

7 – Setting Up Connections
Configuring LUNs for a Device
7-18 FS0054601-00 E
Q
Adapter cell information consists of the following:
❑ State. The state of the LUN, which can be Visible, Hidden, or
Unconfigured.
❑ Topo. Short for topology, either Fabric (the device is in the fabric) or Local
(the device is on the local loop).
❑ Current. The state of the path, which is either Current, Alternate, or
Unconfigured.
The cell and bull’s eye are color-coded to represent path information:
❑ Blue cell. Preferred path
❑ Green bull’s-eye. Current path
❑ Red bull’s-eye. Not the current path
❑ Gray cell with Stop icon. Unconfigured path
❑ Yellow cell. Alternate path
❑ Green bull’s-eye. Current path
❑ Blue bull’s-eye. Not the current path
❑ White cell with no icon. No path
2. Select the following, as appropriate, from the LUN Configuration dialog box:
❑ Auto configure all LUN paths on this device (see section 7.3.1).
❑ Configure LUN path failover for this device (see section 7.3.2):
❑ Auto configuring all LUN paths on this device (see section 7.3.2.1)
❑ Load balancing LUN paths on this device (see section 7.3.2.2)
❑ Configuring LUN paths to the default values (see section 7.3.2.3)
❑ Setting individual LUN paths (see section 7.3.2.4)
❑ Configure LUN masking for this device (see section 7.3.3):
❑ Enabling and disabling all LUNs (see section 7.3.3.1)
❑ Enabling and disabling individual LUNs (see section 7.3.3.2)