User`s guide

7 – Setting Up Connections
Configuring LUNs for a Device
7-16 FS0054601-00 E
Q
7.2.2.3
Enabling and Disabling All LUNs on this Host
You can configure LUN masking—setting LUNs masked or unmasked from the
operating system. Enabling a LUN sets the LUN as unmasked; disabling a LUN
sets the LUN as masked.
Perform the following steps to enable or disable all LUNs on this host:
1. From the Fibre Channel Configuration dialog box LUNs menu, select Enable
LUNs.
2. Do one of the following:
❑ Select Enable All to configure all LUNs as enabled.
❑ Select Disable All to configure all LUNs as disabled.
❑ Select Inverse State to enable currently disabled LUNs and disable currently
enabled LUNs.
7.3
Configuring LUNs for a Device
Perform the following steps to configure individual LUNs for a selected device:
1. Do one of the following:
❑ In the Fibre Channel Configuration dialog box, click in the cell in the Device
Node Name or Device Port Name column. From the Device menu, select
Configure LUNs.
❑ In the Fibre Channel Configuration dialog box, right-click in the cell in the
Device Node Name or Device Port Name column. From the pop-up menu,
select Configure LUNs.
❑ In the Fibre Channel Configuration dialog box, double-click in the cell in
the Device Node Name or Device Port Name column. From the pop-up
menu, select Configure LUNs.